Dexaplan FA 602 Bedienungsanleitung PDF herunterladen

Operating and safety instructions

Introduction

Please read these operating instructions thoroughly and carefully. They are part of this

product and contain important instructions relating to its operation and handling.

Please always observe all safety instructions. Before initial operation, please check

that all parts are ﬁtted correctly. If you have any questions or are unsure about

handling of the device, please contact the dealer or the service ofﬁce. Please keep

these instructions in a safe place and pass them on to anyone else intending to use

the device.

Proper use

This mini window alarm is suitable for doors (including cupboard doors, etc.) and

windows. The device is designed exclusively for operation in dry, enclosed spaces.

This product must only be operated by three round cell batteries LR44 / 357A – 1.5 Volt.

Any use other than that described above or alteration of the device is not permitted

and causes damage. Other hazards such as injury and technical malfunctions

(e.g. short circuit, ﬁre, electric shock) may ensue.

This device is only intended for use in private households.

Delivery scope

Please check the contents immediately after unpacking to ensure that the delivery

scope is complete and the device is in perfect condition.

4x Alarm units FA 602

4x Magnets

Adhesive strips for installation

Batteries (inserted in the device)

Equipment

Alarm unit FA 602

Magnet

Battery compartment cover

On / Off switch (I / 0)

Technical data

Max. current consumption: approx. 55 mA

Operating voltage: 4.5 V DC

Batteries: 3 x round cell, LR44 / 357A – 1.5 Volt

Alarm volume / sound level: approx. 95 dB (A) / 0.30 m

Weight: 42 g

Safety instructions

In the event of damage caused as a result of non-compliance with these operating

instructions, the right to claim under the warranty shall expire. No liability shall be

assumed for consequential damage.

No liability shall be assumed for damage to property or personal injury caused by

improper handling or non - compliance with the safety instructions.

Avoid personal injury:

• Warning! Risk of suffocation! Keep the device, the batteries as well as the

packaging material away from children.

• Warning! Loud alarm! Avoid operating close to ears as this may damage your

hearing!

• Warning! Risk of explosion! Ensure that the batteries do not short circuit or

are thrown into ﬁre. Do not charge the batteries!

• Warning! Risk of burns! Leaking or damaged batteries can burn your skin on

contact. Use protective gloves if the batteries have leaked or are damaged.

Avoid damage to property:

• Avoid bringing the device into contact with moisture as this may cause damage.

• When inserting the batteries, be sure to observe the correct polarity.

• When not using the device for extended periods of time, remove the batteries.

• The device must be battery-operated only. Do not use any other power supply.

• Avoid the following impacts on the device:

- major mechanical stress

- extreme temperatures

- strong vibrations

- strong magnetic or electrical ﬁelds

• Refer to the listed service station only for maintenance and repair work.

Installation

Areas of use and function

This mini window alarm can be installed on doors, windows, cupboards and cabinets.

It can be used to deter burglars and for child safety in the home or e.g. in a mobile home.

The adhesive strips supplied with the device are all you will need for installation. The

device is installed without any wiring or electrical connection.

The mini window alarm consists of an alarm unit FA 602

and a magnet

. The

alarm unit detects when a door or a window is opened. The alarm unit is ﬁtted on the

frame, while the magnet is mounted on the door leaf or window leaf (or vice versa).

As soon as the magnet is more than approx. 20 mm away from the activated alarm,

a very loud alarm will sound.

Before initial operation

The round cell batteries are already installed in new devices. However, they are

covered by a protective ﬁlm, which you must remove. To do this:

o Set On / Off switch

to “0” (off).

o Open the battery compartment by pushing the battery compartment cover

down.

o Hold the batteries in place and pull the protective ﬁlm out.

o Close the battery compartment.

o Prior to the ﬁnal assembly at the desired location (see “Switching alarm on / off”)

perform a provisional functional test of the device.

Choosing the installation position

o When choosing a position for installation of your mini window alarm, avoid direct,

intensive sunlight, vibrations, dust, heat, cold and damp.

Note: The efﬁciency of the magnet can be reduced on metallic doors or windows. In

this case, reduce the distance between the magnet

and the alarm unit

Mini window alarm FA 602

Dexaplan

T 52

max. 10 mm

B C

T52_FA602_GB.indd 1-3 24.10.2006 15:55:28 Uhr

1 2

Inhaltsverzeichnis

Seite 1 - Mini window alarm FA 602

Operating and safety instructionsIntroductionPlease read these operating instructions thoroughly and carefully. They are part of this product and cont

Seite 2 - Dexaplan GmbH

TroubleshootingFault Cause RemedyAlarm sounds although windows / door are closed.The distance between the magnet and the magnet switch is too large (

Weitere Dokumente für Für Zuhause DEXAPLAN FA 602

Um das Dokument anzuzeigen Dexaplan FA 602 Bedienungsanleitung

Dexaplan FA 602 Bedienungsanleitung (2 Seiten)

Dexaplan FA 602 Bedienungsanleitung (4 Seiten)

Dexaplan FA 602 Bedienungsanleitung (16 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Dexaplan FA 602 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Dexaplan FA 602 herunter. Dexaplan FA 602 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für Zuhause DEXAPLAN FA 602

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Dexaplan FA 602