Dexaplan TM 605 Bedienungsanleitung PDF herunterladen

T 52

Operating and safety instructions

Introduction

Please read the operating instructions thoroughly and carefully before initial opera-

tion of the product. The instruction manual is part of this product and contains impor-

tant information relating to initial operation and handling. Please always observe all

safety instructions. Before initial operation, please check that all parts are ﬁtted cor-

rectly. If you have any questions or are unsure about handling of the device, please

contact the service ofﬁce for your country. Please keep these instructions in a safe

place. If you give the device to anyone else, please also pass on all documents sup-

plied with it.

Proper use

The TM 605 pressure mat reacts to active pressure loads (visitors or pets) by way of

the inbuilt sensor ﬁlm. The alarm unit indicates pressure loads with an acoustic sig-

nal, either a loud siren or a quiet or loud gong tone. The pressure mat can be laid un-

der a ﬂexible, thin carpet, cloth or doormat and must be protected against moisture.

The alarm unit is connected to the twin-core cable (approx. 940 cm) and can be set

up either free-standing or installed with the aid of the supplied fastening material.

The device is suitable for use in dry rooms and areas protected from moisture. It

should be connected to a 9-volt block battery (not included) for operation. The device

is intended for private use only. Any other use or modiﬁcation of the device consti-

tutes improper use and poses a serious risk of accident. The manufacturer is not lia-

ble for damage caused by improper use or incorrect operation of the device.

Pack contents

1 pressure mat (including approx. 60 cm cable)

1 alarm unit (including approx. 940 cm cable)

2 fastening screws

2 wall plugs

1 operating instructions

Components

Pressure mat (see Fig. A):

Pressure mat (incl. sensor ﬁlm)

Cable socket

Pressure mat TM 605

Alarm unit (see Fig. B):

Loudspeaker

Fixing holes (two on the reverse side

of the device)

Battery compartment

Battery clip

Battery compartment cover

Cable plug

Cable

Function switch

Technical data

Sensor: sensor ﬁlm

Operating voltage: 9 V DC

Power supply: 9-volt block battery (6LR61, alkaline)

(not included)

Power consumption: max. 70 mA

Functions:

0 (Off), (Siren signal),

(Quiet gong),

(Loud gong)

Acoustic signal (volume): approx. 30-second siren (95 ± 5 dB (A))

2 x quiet gong (65 ± 5 dB (A))

2 x loud gong (85 ± 5 dB (A))

Pressure mat:

Exterior material: plastic (PVC)

Dimensions: approx. 4 x 560 x 360 mm (h x l x w)

Weight: approx. 195 g

Temperature range: -15°C to +40°C

Alarm unit:

Housing material: plastic (ABS)

Dimensions: 25 x 104 x 56 mm (h x l x w)

Weight: 70 g (without battery and without cable)

Temperature range: 0°C to +40°C (alarm unit)

Protection class: III

Safety instructions

The following instructions are for your own safety and satisfaction when oper-

ating the TM 605 pressure mat. Please note that non-compliance with these

safety instructions can lead to a serious risk of accident.

Explanation of the symbols and terms used:

 Danger ! Failure to observe this instruction endangers life and health.

 Caution ! Failure to observe this instruction endangers property.

Tip ! Following this advice will help you to achieve optimal results.

 Danger !

• Do not leave small children unsupervised with the packaging material.

This poses a danger to life by suffocation!

• Do not leave children unsupervised with the device. This poses a danger to

life and risk of injury!

• Do not use the device in the presence of sick or disabled people or ani

mals! Shock caused by the siren poses a danger to life and risk of injury.

• Do not damage any gas, electricity, water or telecommunication lines

when ﬁtting the device! This poses a danger to life and risk of injury and

damage

• Do not allow leaky or damaged batteries to come into contact with the

skin or eyes! Use suitable protective gloves and clothing. Corrosive acid

poses a danger to life and a risk of injury!

• Never expose the device to ﬁre, heat or to temperatures of over 50° C for

any length of time! This poses a danger to life by explosion.

• Do not short-circuit the batteries or recharge them! This poses a danger to

life by explosion!

• Make sure that your hearing is not exposed to the loud alarm signal for

any length of time! This can cause serious damage to the hearing.

• Make sure that the loud siren is not triggered close to the ears. This can

cause serious damage to the hearing!

• Handle the cable with care! Install it so that it cannot get damaged and

does not create a stumbling hazard. Otherwise there is a danger to life and

a risk of injury and ﬁre!

• Position the pressure mat and the cover so that they do not create a stum

bling hazard! Otherwise there is a danger to life and a risk of injury!

 Caution !

• Operate the device with a 9-volt block battery (6LR61, alkaline) only!

• Make sure that you insert the battery with the correct polarity!

• Remove the battery from the device during long periods of non-use!

• Only use new batteries and under no circumstances used ones!

• Do not cover the alarm unit with any objects. This may reduce the volume

of the acoustic signal on the loudspeaker

• Do not allow the pressure mat to come into contact with moisture. Protect

it from rainwater!

• Do not allow the alarm unit to come into contact with moisture!

• Protect the pressure mat and the alarm unit from strong magnetic or elec

tric ﬁelds, and from heavy mechanical strain and vibrations! Use the device

with the supplied original parts only or with parts that are suitable for it.

• Check before initial operation that all components are assembled in

accordance with the operating instructions!

• Before assembly and initial operation of the device, check that the delivery

is complete and undamaged!

• The device must only be repaired by authorized and skilled specialists!

Otherwise there is a risk of damage resulting from improper use and loss

of the warranty.

• When positioning the pressure mat, make sure that:

- there are no pointed or sharp-edged objects underneath it.

- the surface on which it is laid is even and smooth.

- it is covered by a thin, ﬂexible carpet, a cloth or a doormat to conceal

it from view.

• Use the alarm unit at temperatures of 0°C to + 40°C and the pressure mat

at temperatures of -15°C to +40°C! Higher or lower temperatures may

adversely affect operation.

Initial operation

Tip ! The pressure mat reacts sensitively and quickly to pressure loads.

You can use the pressure mat to indicate the presence of welcome visitors (e.g. fam

ily or pets) or of unwanted visitors (e.g. intruders) with an acoustic signal. There is a

choice of a quiet or loud gong tone or an approx. 30-second long siren signal.

Preparation and material required:

The stated materials are not included. The information provided here is non-

binding and intended as a guide. The quality of the material depends on indi

vidual local requirements.

You will need:

- A 9-volt block battery (6LR61, alkaline) for the power supply (not included).

- A pen to mark the installation points.

- A hammer drill with bit to make the holes for mounting the device on a

wall with the two wall plugs or for cable entry (e.g. in a door frame).

- A crosstip screwdriver for installation with the fastening screws.

Power supply

 Caution ! Operate the device with a 9-volt block battery (6LR61, alkaline)

only! Make sure that the battery is inserted with the correct polarity. Remove

the battery from the device during long periods of non-use.

Replace old batteries with new batteries only and never with used ones.

 Switch the function switch

to the position (“0“).

 Remove the battery compartment cover

completely from the battery

compartment

on the alarm unit housing by pushing the battery com

partment cover

downwards.

 Connect a new 9-Volt block battery to the battery clip

 Push the battery into the battery compartment

 Fit the battery compartment cover

back onto the battery compartment

Position

Position of the pressure mat

Tip ! Do not use a stiff carpet or doormat to cover the pressure mat, since it

reacts to points of pressure. If the ﬂoor and/or the underside of the carpet or

doormat is uneven, malfunctions may occur.

 Always spread the pressure mat out on a clean and even surface. Remove

any sharp objects, e.g. stones or grit, since these can cause malfunctions

or irreparably damage the pressure mat.

Detecting people

 Choose the area in which the pressure mat is to detect the presence of peo-

ple, e.g. in the entrance area or in front of an area you wish to protect.

 Spread the pressure mat out completely on the ﬂoor/surface and smooth it

out ﬂat and even (see Fig. A).

KOE31_GB.indd 1-4 29.09.2005 18:08:57 Uhr



Cover the full surface of the entry mat with a cloth, carpet or a doormat.

1 2

Pressure mat TM 605 1
Troubleshooting 2

Inhaltsverzeichnis

Seite 1 - Pressure mat TM 605

T 52Operating and safety instructionsIntroductionPlease read the operating instructions thoroughly and carefully before initial opera-tion of the prod

Seite 2 - Troubleshooting

Detecting pets (dog or cat) Choose the area in which you wish the pressure mat to detect the pres-ence of your cat or dog, e.g. a patio door.  C

Weitere Dokumente für Für Zuhause DEXAPLAN TM 605

Um das Dokument anzuzeigen Dexaplan TM 605 Bedienungsanleitung

Dexaplan TM 605 Bedienungsanleitung (2 Seiten)

Dexaplan TM 605 Bedienungsanleitung (6 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Dexaplan TM 605 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Dexaplan TM 605 herunter. Dexaplan TM 605 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für Zuhause DEXAPLAN TM 605

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Dexaplan TM 605